Description
Edelbrock Engine Water Pump Gasket Set Big/ Small-Block for Mopar 7257
- Application: Application Specific
- Mounting Hole Quantity: 7
- Mounting Hole Diameter: 0.402 in
- Availability Note: Available to Order
- Warranty: 12 Months
- Material: Composite
- Thickness: 0.025 in
Install Notes
Incorrect alignment or an unbalanced condition puts excessive strain on the pump’s shaft and/or bearing and will result in early failure of the shaft and/or bearing; The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft; Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4″ pilot hole, so an adapter must be used when installing a water pump with a 5/8″ shaft, the adapter bushing is supplied with the unit; So special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty; The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump
Description and Information
Edelbrock #7257 Engine Water Pump Gasket Set Mopar Big/Small Block. Is it time to rebuild your Edelbrock mechanical water pump? No problem– these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials and can be installed easily without any modifications.
