Description
Edelbrock Water Pump Chrysler 361/440 BB (1958-1979) [Standard Rotation] Black / Satin Finish
- Application: Application Specific
- Thermostat And Housing Included: No
- Mounting Hole Quantit:y 4
- Housing Material: Aluminum
- Impeller Material: Powdered Metal
- Installation Warnings: Yes
- Hub Hole Quantity: 6
- Fan Clutch Included: No
- Impeller Vane Quantity: 6
- Includes Back Housing:
- Black – Yes
- Satin – No
- Related Cooling Fan Components: No
- Casting Number: 8814
- Availability Note: Available to Order
- Warranty: 12 Months
- Hub Height: 3.070 in
- Impeller Rotation: Standard
- Outlet Quantity: 1
- Pulley Included: No
- Water Pump Drive Type: V-Belt
Install Notes
Black Finish
-
Incorrect alignment or an unbalanced condition puts excessive strain on the pump’s shaft and/or bearing and will result in early failure of the shaft and/or bearing. The balance of the assembly depends primarily upon the concentricity of the fan clutch and spacers with the pump shaft.; Concentricity is not assured when universal type clutches or spacers are used. Universal fan clutches and spacers have a 3/4″ pilot hole, so an adapter must be used when installing a water pump with a 5/8″ shaft, the adapter bushing is supplied with the unit. So special care must be taken to maintain concentricity with the shaft and the fan clutch. Failure to do so will void warranty.; The use of aftermarket (non-OEM) fan spacers are not recommended and will void the warranty of the water pump.
Satin Finish
- The Victor series are heavy duty water pumps for both street and racing applications; These pumps are a direct replacement for the original equipment pump to provide compatibility with all accessories and pulleys.; It offers weight savings along with increased durability and cooling potential. It is a standard rotation water pump for Chrysler Wedge (B & RB), 426 Hemi and Big-Block engines; DO NOT use on engines converted to a serpentine belt pulley system; Installation is the same as for original equipment water pumps. Therefore, please consult your service manual for specific procedures.; CAUTION: Be sure that the fan bolts don’t protrude through the hub so far that they hit the water pump housing. Check closely for any interference with drive belts; some filing for clearance may be necessary with some applications. Verify that the radiator fan is properly balanced. Imbalanced fans can cause severe damage and/or injury and will void your warranty.
Description and Information
